contractor
equipment

Open
Mon. - Fri.
8 a.m. - 5 p.m.
Sat.
8 a.m. - 4 p.m.

Phone: 203-696-0800
Fax: 203-696-0865
Bullfloat - Hammers:
(Demolition & Rotary) Below
 
All equipment is available for sale, too!
models shown here are representative
Item
Number
Item Description
Category
    
Bullfloat
    
 
20-3600
48" Bullfloat w/6' Handle.
 
20-3700
6' Handle for Bullfloat
Compactors
   ---
20-1600
 Jumping Jack Compactor. For footings & trenches.
20-2000

Stone Plate Compactor. For solid base compaction & also has water tank for asphalt compaction.

Compressors
 --- ---
20-2800
 Atlas Copco Diesel Air Compresson. 160CMF.
 
20-2500
 Air Compressor, 15CMF,
Gas, 10hp.
Bits
    
 
29-9001
Point-Moil. 1-1/4" hex.
 
29-9002
Chisel. 1" x 1-1/4" hex.
 
29-9003
Asphalt Cutter. 1-1/4"
 
29-9004
Chisel. 3" x 1-1/4" hex.
 
29-9014
Point-Moil. 1-1/8" hex.
 
29-9015
Chisel. 1" x 1-1/8" hex.
 
29-9016
Clay Spade Chisel.
 
29-9017
Frost Wedge.
 
29-9018
Chisel. 3" x 1-1/8"
 
29-9020
Asphalt Cutter. 1-1/8" hex.
Blades
    
 
29-9048
14" Diamond Asphalt Blade.
 
29-9050
14" Diamond Blade.
Bucket
    
 
29-9038
8" Trenching Bucket. Ideal for Belgian block work, plus wiring and plumbing installations.
Cone
    
 
29-9021
Traffic Cone.
Hoses
    
 
29-9010
Air Hose. 3/4" x 50'
 
29-9011
Air Hose. 3/8" x 50'
 
29-9030
Discharge Hose. 2" x 50'
 
29-9031
Suction Hose. 2" x 20'
 
29-9032
Discharge Hose. 3" x 50'
 
29-9033
Suction Hose. 3" x 20'
 
29-9101
Air Hose. 3/4" x 50'
20-7200

John Deere Skid Steer Loader. 37 hp., 3-cylinder, diesel engine. SAE operating load: 1,410 lbs.
Attachments
    
29-9039
Eliminator Rake (shown attached to Skid Steer).
Ideal for lawn installation, landscaping, finish work in tight areas. Available in 72" width that covers all tire marks. Quick-tatch; no hydraulic hookup. Optional scarifying teeth.
 
29-9040
York 4' Rake (Lawn Trac).
Tampers
    
 
29-9013
Flat Tamper. 8" x 8"
 
21-2100
Jitterbug Tamper.
 
21-2200
Hand Tamper.
Pumps
    
20-9100
3" Trash Pump.
21,000 GPH. Ideal for
pools.
20-9400
2" Trash Pump.
16,000 GPH
20-9500
2" Cent. Pump. 5 hp.
 
22-3900
2" Electric Submersible Pump.
 
20-9900
3" Diaphram-Wacker Pump.
models shown here are representative
Item
Number
Item Description
Category
  
Excavators/
Loaders
CALL BEFORE YOU DIG. IT'S THE LAW!
1-800-922-4455
Click here for more info.
20-7600
 Allmand back-hoe/loader offers double-duty convenience and high-level performance. Digs 8.5 feet. Lifts 1500 lbs.
20-7700
 Yanmar Vio 35-2 mini-excavator features maxi-performance and operator comfort. "No Marx" Rubber Tracks won't damage sidewalks, etc. Digs 8 feet deep. Goes through 5 foot wide gate opening. Quiet engine. Variable hydraulics, shockless swing & travel section. Digs 11 feet.

Recommended item!
29-9038

 8" Trenching Bucket. Ideal for Belgian block work, plus wiring and plumbing installations.
Hammers/
Breakers
--
- 		---
20-0020
 Cobra Mk 1 65 lb. Hammer-Breaker. Gas. Totally portable. Use it anywhere.
 
20-0050
 Makita 75 lb. Hammer-Breaker. Electric.
1-1/8" shank.
20-0010
 Makita 20 lb. Demo Hammer. Ideal for chipping concrete and mortar between masonry block, etc.
20-1000
 Makita 65 lb. Hammer-Breaker. Electric. 1-1/8" Shank. Breaks concrete up to 6" thick.
20-1800
 Makita 45 lb. Demo Hammer. Electric.
 
85-1700
 Makita 35 lb. Demo Hammer. 1-1/8" shank.
  Makita Rotary Hammer. Perfect for drilling in concrete.
Jacks
    
 
01-5100
 20-ton Hydraulic Jack. Great for lifting huge cumbersome items...like beer-bellies.
Nailers
    
20-8500
 Makita Finish Nailer. Air-powered. Requires small air compressor. Ideal for trim and molding.
20-8600
 Hitachi Framing Nailer. Air-powered. Requires small air compressor.
 
20-8700
Small Floor Nailer w/hammer.
 
20-8800
Hardwood Floor Nailer.
 
20-8900
 Floor Nailer. Air-powered. Fast, efficient. Requires small air compressor.
Saws
    
21-1200
14" Cut-off Saw. Gas. Hand-held. Cuts flagstone, concrete, etc. Diamond blades available.
 
21-1800
18" Tile Saw. 1 hp.
 
21-2600
12" Chop Saw. Electric. Hand-held.
 
21 4100
12" Cut-off Saw. 2-cycle
 
21-6700
Tile Saw w/dia. Blade
Sheet Rock Lift
    
 
21-3300
 Sheet Rock Lift. easily lifts a 4' x 8' panel 12 ft. high.
Skid Steers
save you time, pain, and money!
CALL BEFORE YOU DIG. IT'S THE LAW! 1-800-922-4455
Click here for more info.

top